Loading...
profile-image-1

Dr. Khondker Omar Anwar

8801758852242
oakhondker@bsmraau.edu.bd
Distinguished Professor

Faculty of Aviation Standardization, Regulations and Safety

Bio Data

Dr. Khondker Omar Anwar
Distinguished Professor and
Head, Department of Aviation Safety and Accidents Investigation.
Head, Department of Autonomous Systems Engineering,
Head, Department of Aircraft Maintenance Engineering,
Director, Directorate of Higher Studies and Research (BSMRAAU Research Centre)
 
Contact Address:  
Bangabandhu Sheikh Mujibur Rahman Aviation and Aerospace University (BSMRAAU)
Old Airport, Tejgaon, Dhaka-1215, Bangladesh.
Mobile: +8801758852242
Email: oakhondker@yahoo.co.uk, oakhondker@bsmraau.edu.bd

Education Highlights:

Japan Society for the Promotion of Science Postdoctoral Research Fellowship (2002-2004), Kyoto Institute of Technology (KIT), Japan
PhD in Aerospace Engineering (2000), RMIT University Austarlia AND Cooperative Research Centre for Advanced Composite Structures (CRC-ACS), Melbourne, Australia.
Master of Science in Mechanical Engineering (1995), (BUET) Dhaka, Bangladesh.
Bachelor of Technology (1993), Indian Institute of Technology (IIT) Madras, India.
Higher Secondary Certificate Examination (1988), Rangpur Cadet College
Secondary School Certificate Examination (1986), Rangpur Cadet College

Career Hightlights:

October 2019 – Present Distinguished Professor and Academic Advisor Department of Aerospace Engineering BSMR Aviation and Aerospace University Dhaka, Bangladesh
January 2016 – 23rd December 2018 Senior Faculty Member Department of Mechanical Engineering Higher Colleges of Technology (HCT) Abu Dhabi Men’s Campus Abu Dhabi, United Arab Emirates
January 2010 – November 2015 Section Manager Composite Manufacture and Maintenance Land Combat Systems Division Emirates Advanced Research & Technology Holding (EARTH) Special Operations Command Presidential Guards, Abu Dhabi, UAE
April 2005 – April 2009 Manager, Division of Composites Emirates Marine Technologies Department of Research and Development Special Operations Command Presidential Guards, Abu Dhabi, UAE
November 2002 – November 2004 JSPS Postdoctoral Research Fellow Research Academic Japan Society for the Promotion of Science (JSPS) Division of Advanced Fibro-Science Department of Engineering Kyoto Institute of Technology (KIT), Kyoto, Japan
February 2000 - November 2002 Lecturer, Department of Mechanical Engineering & Mechatronics, University of Southern Queensland, Toowoomba, Queensland, Australia
September 1995 – September 1999 PhD Researcher and Research Academic Royal Melbourne Institute of Technology University (RMIT) and Cooperative Research Centre for Advanced Composite Structures (CRC-ACS) Limited Melbourne, Australia.
March 1994 – 2000 Lecturer Department of Mechanical Engineering Bangladesh University of Engineering and Technology (BUET) Dhaka, Bangladesh

Awards:

Award and certificate of appreciation for being Outstanding At Work by the Special Operations Command’s R&D Department of the UAE Armed Forces (April 2008).
Japan Society for the Promotion of Science (JSPS) Postdoctoral Research Fellowship and JSPS Research Grant (2003-2004) to undertake research activities in the areas of advanced textile composite materials and structures at the Division of Advanced Fibro Science, Kyoto Institute of Technology (KIT), Japan.
Award and certificate of sponsorship for the Best Oral Presentation on bio-inspired/natural fibre reinforced composite materials at the 2003 Annual American Institute of Chemical Engineers (AIChE) Conference, San Francisco, CA, USA.
Australian Government Postgraduate Research Scholarship (OPRS) funded by the Department of Education Employment and Training (DEET), Australia to undertake PhD studies in the areas of advanced composite materials and structures at RMIT University (1995-1999).
Cooperative Research Centre for Advanced Composite Structures (CRC-ACS), Australia Research Scholarship, RMIT University Faculty of Engineering Research Tutorship and Supplemental Research Scholarship to support PhD studies (1996-1999).
Indian Council for Cultural Relation (ICCR) sponsored Merit Scholarship to undertake 4 year Bachelor of Science in Aerospace Engineering at the Indian Institute of Technology Madras, IITM (1989- 1993)

Member Hightlights:

Member, The Institution of Engineers (MIEAust), Australia
Member, American Institute of Chemical Engineers (MAIChE), USA
Member, Australian Composite Structures Society (MACSS), Australia
Reviewer, Journal of Composites, Part A: applied science and manufacturing, UK.
Reviewer, Journal of Polymers and the Environment, MA, USA.
Reviewer, Journal of Plastics, Rubber and Composites: macromolecular engineering, UK.
Design Strand Committee Member, University of Southern Queensland, Australia (2000-2002)
Coordinator, JSPS Core-to-Core Integrated Action Initiative Program, Kyoto Institute of Technology (2003-2004)
Program Development Committee Member for HCT’s Faculty of Aeronautical Engineering (2016)
System-Wide Team Leader for Health, Safety & Environment Course at HCT (Jan - Dec 2018)
Member, Syndicate, BSMRAAU, Dhaka, Bangladesh (2020).
Member, Academic Council, BSMRAAU, Dhaka, Bangladesh (2021).
Member, Finance Committee, BSMRAAU, Dhaka, Bangladesh (2021).
Program Leader, BSMRAAU Core-to-Core Integrated Research Initiative Program at BSMRAAU (2021)

Publication:

Peer Reviewed International Journal Publications with Impact Factor: 15

1. M. Chikhalsouk, O.A. Khondker, K. Zouhri, L. Ferreira, Modeling and Simulation Swash Plate 
Pump Response Characteristics in Load Sensing and Pressure Compensated Hydraulic System. 
International Journal of Modern Engineering Research (IJMER), Vol. 7, Issue 8, Ver. 1. August 
2017.
2. K. Zouhri, J. Alsadi, L. Ferreira, M. Chikhalsouk, M. Shinneeb, F. Koudsi, O.A. Khondker, Y. Nimir, 
Numerical method of the TiO2 porosity effect on dye sensitized solar cell exergy efficiency, 
Journal of Solar Energy, 155, P 920-933, August 2017. (Impact Factor 5.24)
3. O.A. Khondker, U.S. Ishiaku, A. Nakai and H. Hamada, A novel processing technique for 
thermoplastic manufacturing of unidirectional composites reinforced with jute yarns, Composites 
Part A: applied science and manufacturing, Elsevier Science Ltd. UK, Vol. 37, No. 12, P 2274-
2284, 2006. (Impact Factor 6.90)
4. O.A. Khondker, X. Yang, N. Usui and H. Hamada, Mechanical properties of textile-inserted 
PP/PP knitted composites using injection compression molding, Composites Part A: applied 
science and manufacturing, Vol. 37, No. 12, P 2285-2299, 2006. (Impact Factor 6.90)
5. O.A. Khondker, U.S. Ishiaku, A. Nakai and H. Hamada, Tensile, flexural and impact properties 
of jute fibre-based thermosetting composites, Plastics, Rubber and Composites: 
Macromolecular Engineering, Invited paper, Vol. 34, No. 10, P 450-462, 2005. (Impact Factor 
1.16)
6. O.A. Khondker, K.H. Leong, I. Herszberg and H. Hamada, Impact and compression after-impact 
performance of weft-knitted glass textile composites, Composites Part A: applied science and 
manufacturing, Vol. 36, No. 5, P 638-648, 2005. (Impact Factor 6.90)
7. U.S. Ishiaku, O.A. Khondker, S. Baba, A. Nakai and H. Hamada, Processing and 
characterization of short-fibre reinforced jute/poly butylene succinate biodegradable 
composites: the effect of weld-line, The Journal of Polymers and the Environment, Invited 
paper, Vol. 13, No. 2, P 151-156, 2005. (Impact Factor 2.23)
8. O.A. Khondker, U.S. Ishiaku, A. Nakai and H. Hamada, Fabrication and mechanical properties 
of unidirectional jute/pp composites using natural and pp-coated jute yarns by film stacking, 
Page 10 of 18 A Detailed CV of Dr. Omar A. Khondker
The Journal of Polymers and the Environment, Invited paper, Vol. 13, No. 2, P 115-126, 
2005. (Impact Factor 2.23)
9. O.A. Khondker, I. Herszberg and H. Hamada, Measurements and prediction of the compressionafter-impact strength of glass knitted textile composites, Composites Part A: applied science 
and manufacturing, Vol. 35, No. 2, P 145-157, 2004.
10. O.A. Khondker, T. Fukui, A. Nakai and H. Hamada, Initial fracture of the welt weft-knitted 
textile composites, Composites Part A: applied science and manufacturing, Vol. 35, No. 10, P 
1185-1194, 2004. (Impact Factor 6.90)
11. O.A. Khondker, T. Fukui, M. Inoda, A. Nakai and H. Hamada, Fabrication and mechanical 
properties of aramid/nylon knitted composites, Composites Part A: applied science and 
manufacturing, Vol. 35, No. 10, P 1195-1205, 2004. (Impact Factor 6.90)
12. O.A. Khondker, K.H. Leong and I. Herszberg, An investigation of the structure-property 
relationship of knitted composites, Journal of Composite Materials, SAGE Publications, USA, 
Vol 35, No 6, P 489, 2001 (Placed within 50 most cited journal articles). (Impact Factor 2.03)
13. O.A. Khondker, K.H. Leong and I. Herszberg, Study of composite compressive properties due 
to biaxial deformation of knitted glass fabrics, Composites Part A: applied science and 
manufacturing, Invited Paper; Vol. 32, P 1303-130, 2001. (Impact Factor 6.90)
14. O.A. Khondker, K.H. Leong and I. Herszberg, Effects of biaxial deformation of the knitted glass 
preform on the in-plane mechanical properties of the composite, Composites Part A: applied 
science and manufacturing, Invited Paper, Vol. 32, P 1513-1523, 2001. (Impact Factor 6.90)
15. O.A. Khondker and Job Kurian, Low density conductance through composite geometries, 
Vacuum, Vol 46, No. 4, P 331 – 334, 1995. (Impact Factor 2.42).

Book Chapter and Contribution to Book Chapter

1. O.A. Khondker, T. Fukui, A. Nakai and H. Hamada, Effects of Fabrication and Processing
Techniques of Aramid/Nylon Weft-Knitted Thermoplastic Composites on Tensile Behaviour, 
Book Chapter in Composite Technologies for 2020, P 1047-1051, 2004.
2. Contributed to a Chapter of a Book entitled “3D Fibre Reinforced Polymer Composites”, 
Chapter 7 Knitted Composite Materials, Elsevier Science Ltd., ISBN: 0-08-043938-1, P 147-
162, 01 January, 2002.

Refereed International Conference Proceedings: 36

1. Molham H. Chikhalsouk, Khalid Zhouri, Omar A. Khondker, Monsif Shinneeb, Mohamed Sharis, 
The Applicability of The Adaptive Wavelet Analysis in Flutter Identification in Aerospace 
Structures, Accepted by the Program Committee for presentation on the Aviation and Space 
Technology International Conference, as a part of the Advances in Science and Engineering 
Technology Multi-Conference (ASET’18), 2018.
2. O. A. Khondker, X. Yang , N. Usui, A. Nakai1 and H. Hamada, Mechanical properties of textile￾inserted pp/pp knitted composites, Proceeding of Annual Technical Conference on Society of 
Plastic Engineers (ANTEC), Boston, Massachusetts, USA, 1-5 May, 2005, P1554-1558.
3. U.S. Ishiaku, Y. W. Leong, O.A. Khondker, A. Nakai and H. Hamada, Mechanical and 
Morphological Properties of PLA Fabric Insert Injection Molded Biodegradable Composites, 
Session: Bio/Eco, 11th US-Japan Conference on Composite Materials & International Conference 
on Composite materials (TEXCOMP-7), September 9-11, 2004, Yonezawa, Yamagata, Japan.
Page 11 of 18 A Detailed CV of Dr. Omar A. Khondker
4. U.S. Ishiaku, Y. W. Leong, O.A. Khondker, A. Nakai and H. Hamada, Fabrication and 
Characterization of PLA Fabric Insert Injection Molded Biodegradable Composites, Paper ID 
Number MP-3, ASC/ASTM-D30 Joint 19th Annual Technical Conference, October 17-20, 2004 
- Atlanta, Georgia.
5. O.A. Khondker, U.S. Ishiaku, A. Nakai, H. Hamada, Mechanical Properties of Jute-based 
Thermosetting Composites, Session: Bio/Eco, 11th US-Japan Conference on Composite Materials 
& International Conference on Composite materials (TEXCOMP-7), September 9-11, 2004, 
Yonezawa, Yamagata, Japan. 
6. O.A. Khondker, X. Yang, A. Nakai, H. Hamada, Mechanical Properties of Textile-Inserted 
PP/PP Knitted Composites Using Injection Compression Molding, Session: Textile-Fracture, 11th
US-Japan Conference on Composite Materials & International Conference on Composite 
materials (TEXCOMP-7), September 9-11, 2004, Yonezawa, Yamagata, Japan. 
7. O.A. Khondker, X. Yang, A. Nakai, H. Hamada, Mechanical Properties of Single Polymer Homo￾PP Composites Combining Weft-knitting and Injection Compression Molding Techniques, Session: 
Damage I, 11th US-Japan Conference on Composite Materials & International Conference on 
Composite Materials (TEXCOMP-7), September 9-11, 2004, Yonezawa, Yamagata, Japan.
8. O. A. Khondker, H. Hamada, U.S. Ishiaku and A. Nakai, Fabrication and Mechanical 
Performance of Jute/Vinyl ester Composites Using Natural and Bleached Woven Jute Fabrics, 
PPS-20 (Polymer Processing Society Annual Meeting), Paper No. 134, Session T3 (Green 
Materials and Processing Technology), Akron, Ohio, USA, June 20-24, 2004.
9. O.A. Khondker, N. Usui, A. Nakai and H. Hamada, Dynamic and Static Impact Performances 
of PP Plain Knitted Fabric Inserted PP Composite Using Injection Compression Moulding, 
International Crashworthiness Conference (I-CRASH2004), 14-16 July, 2004, San Francisco, 
USA.
10. U. S. Ishiaku, Y.W.Leong, O. A. Khondker, A. Nakai and H. Hamada, The Effect of Injection 
Molding Parameters on the Weld-Line Strength of Jute Fibre/Poly (Butylene) Succinate 
Biodegradable Composites, 2nd Malaysia -Japan International Plastics Conference, Malaysia , 
January 6-7, 2004.
11. U.S. Ishiaku, Y.W. Leong, O.A. Khondker, A. Nakai and H. Hamada, The Effect of Injection 
Speed on the Weld Line properties of Jute Fibre/Poly (Butylene) Succinate Biodegradable 
Composites, Annual Technical Conference of the Society of Plastic Engineers (ANTEC 2004), 
Chicago, IL, USA, P 1468-1470, May 16-20, 2004.
12. O.A. Khondker, U.S. Ishiaku and H. Hamada, Fabrication, Processing Techniques and 
Mechanical Properties of Unidirectional Jute/Polypropylene (PP) Composites Using Natural and 
Coated Jute Yarns, 2nd International Conference on structure, Processing and properties of 
Materials (SPPM2004), Dhaka, Bangladesh, P 436-442, February 25-27, 2004.
13. O.A. Khondker, U.S. Ishiaku and H. Hamada, Processing and Mechanical Properties of Jute 
Thermosetting Composites Reinforced with Woven and Flat-Braided Jute Fabrics, 2nd
International Conference on structure, Processing and properties of Materials (SPPM2004), 
Dhaka, Bangladesh, P 224-231, February 25-27, 2004.
14. O.A. Khondker, T. Fukui, A. Nakai and H. Hamada, Fabrication, Processing and Mechanical 
Properties of the Weft-Knitted Textile Composites Using Aramid/Nylon Micro-Braid Yarns, 4th
Asian-Australasian Conference on Composite Materials (ACCM-4), Sydney, Australia, P 1047-
1051, July 6-9, 2004.
15. O.A. Khondker, T. Fukui, A. Nakai and H. Hamada, Initial Fracture Behaviour of the Weft￾Knitted Textile Composites Having Welt-Knit Architectures, 4th Asian-Australasian Conference 
on Composite Materials (ACCM-4), Sydney, Australia, P 397-402, July 6-9, 2004.
Page 12 of 18 A Detailed CV of Dr. Omar A. Khondker
16. O.A. Khondker, X. Yang, N. Usui, A. Nakai and H. Hamada, Fabrication and Mechanical 
Properties of Textile Insert Injection Molding, Annual Technical Conference of the Society of 
Plastic Engineers (ANTEC 2004), Chicago, IL, USA, P 667-670, May 16-20, 2004.
17. O.A. Khondker, T. Fukui, X. Yang, A. Nakai and H. Hamada, Fabrication, Processing and Tensile 
Properties of Weft-Knitted Hybrid Composites Combining Microbraiding and Compression 
Molding Techniques, Annual Technical Conference of the Society of Plastic Engineers (ANTEC 
2004), Chicago, IL, USA, P 2683-2686, May 16-20, 2004.
18. U. S. Ishiaku, S. Baba, O.A. Khondker, A. Nakai and H. Hamada, Processing and 
Characterization of Short-Fibre Reinforced Jute /Poly Butylene Succinate Biodegradable 
Composites: The Effect of Weld-Line, Invited Paper, Annual Meeting of American Institute of 
Chemical Engineers (AIChE), San Francisco Hilton, San Francisco, CA, USA, November 17-21, 
2003.
19. K. Eto, K. Sugimoto, O.A. Khondker, A. Nakai, Impact Property of Matrix Hybrid Thick￾Composites, Proceedings of the 8th Japan International SAMPE Symposium, Tokyo, Japan, 
November 18-21, 2003. 
20. T. Narita, O. A. Khondker, A. Nakai, Effects of Molding Conditions on the Bending properties 
of Continuous Fibre Reinforced CF/PPS Composites Using Micro-Braided Yarn, Proceedings of 
the 8th Japan International SAMPE Symposium, Tokyo, Japan, Vol. 2, P 1153-1156, November 
18-21, 2003. 
21. U. S. Ishiaku, S. Baba, O. A. Khondker, A. Nakai and H. Hamada, The Effect Of Weld-Line On 
The Properties Of Short-Fibre Reinforced Jute /Poly Butylene Succinate Biodegradable 
Composite, Proceedings of the 8th Japan International SAMPE Symposium, Tokyo, Japan, Vol. 
1, P 135-138, November 18-21, 2003. 
22. U. S. Ishiaku, M. Kitagawa, O. A. Khondker, A. Nakai and H. Hamada, The Effect of Processing 
Parameters on the Interfacial and Mechanical Properties of Unidirectional Jute Fibre/Poly 
(Lactic Acid) Biodegradable Composites Using Micro-Braided Jute Yarn, Interfaces and 
Interphases in Multicomponent Materials (A Merged Meeting of ICCI and IPCM), Balatonfüred, 
Hungary, October 5 - 8, 2003. 
23. O.A. Khondker, U.S. Ishiaku and H. Hamada, Processing and Mechanical Properties of Jute 
Fibre-Based Textile Composites, 8th Pacific Polymer Conference (PPC8), Bangkok, Thailand, 
November 24-27, 2003. 
24. O.A. Khondker, U. S. Ishiaku, A. Nakai and H. Hamada, Optimization of Processing and 
Mechanical Properties of Unidirectional Jute/PP Composites Using Microbraiding Technique, 
Annual Meeting of American Institute of Chemical Engineers (AIChE), San Francisco Hilton, San 
Francisco, CA, USA, November 17-21, 2003. 
25. O.A. Khondker, U. S. Ishiaku, A. Nakai and H. Hamada, Fabrication And Mechanical Properties 
Of Unidirectional Jute/Polypropylene (PP) Composites Using Natural and Coated Jute Yarns By 
Film Stacking Method, Annual Meeting of American Institute of Chemical Engineers (AIChE), San 
Francisco Hilton, San Francisco, CA, USA, November 17-21, 2003. 
26. O.A. Khondker, K. Sugimoto, U. S. Ishiaku, A. Nakai and H. Hamada, The Effect of bleaching 
treatments on the Interfacial and Tensile behaviour of the Woven Jute Fabric Reinforced 
Vinylester Composites, Interfaces and Interphases in Multicomponent Materials (A Merged 
Meeting of ICCI and IPCM), Balatonfüred, Hungary, October 5 - 8, 2003. 
27. O.A. Khondker, U. S. Ishiaku, A. Nakai and H. Hamada, Fabrication, Processing and Mechanical 
Properties of Flat Braided thermosetting Composites Using Natural and Coated Jute Yarn, SPE 
Automotive Composites Conference, MI, USA, September 9-10, 2003. 
Page 13 of 18 A Detailed CV of Dr. Omar A. Khondker
28. O.A. Khondker, Mechanical Performance of Knitted Textile Composites, Conference 
Proceedings of the 4th International Conference on Mechanical Engineering (ICME2001), Vol. 
V, P 7-12, 26-28 December 2001, Dhaka, Bangladesh.
29. O.A. Khondker, Trade-off Effect of the Knit-Structural Parameters on the Tensile and Impact 
Strength of Weft-Knitted Textile Composites, Conference Proceedings of the 8th East AsiaPacific Conference on Structural Engineering & Construction (EASEC-8), Paper No. 1493, 5-7 
December 2001, Singapore.
30. O.A. Khondker, K.H. Leong, M.K. Bannister and I. Herszberg, Performance of Weft-Knitted 
Glass Fibre Fabric Composites with respect to Impact Damage Resistance and Tolerance, 
Proceedings of the 32nd International SAMPE Technical Conference, Boston, Massachusetts, USA, 
November 5-9, P 123, 2000.
31. O.A. Khondker, K.H. Leong and I. Herszberg, Variation in Composite Compressive Properties 
due to Biaxial Deformation of Knitted Glass Fabric, Proceedings of the 2nd ACUN International 
Composite Meeting, Sydney, Australia, February 14-18, P 566-571, 2000.
32. O.A. Khondker, K.H. Leong and I. Herszberg, Variation in Composite Tensile Properties due to 
Biaxial Deformation of Knitted Glass Fabrics, Conf. Proc. of 12th International Conference on 
Composite Materials (ICCM-12), Paris, France, July 5-9, P 816, 1999.
33. O.A. Khondker, K.H. Leong, M.K. Bannister and I. Herszberg, The Effect of Architecture on the 
Impact Properties of Knitted Composites, Conf. Proc. of 1st Asian-Australian Conference on 
Composite Materials (AACCM-1), Osaka, Japan, Oct. 7-9, Vol. 1, P 204-1-4, 1998.
34. O.A. Khondker, P.J. Callus, K.H. Leong, J.I. Curiskis and I. Herszberg, The Effect of Architecture 
on the Mechanical Properties of Knitted Composites, Conf. Proc. of 11th International Conference 
on Composite Materials (ICCM-11), Gold Coast, Australia, Vol. 5, P 328-340, July 14 –18, 
1997.
35. S. J. Chowdhury and O. A. Khondker, ‘Numerical Study of Coaxial Swirling Turbulent Jets 
with Axisymmetric Expansion’, The Ninth International Symposium on Transport Phenomena in 
Thermal-fluid Engineering, June 25-28, 1996, Singapore. 
36. S. J. Chowdhury and O. A. Khondker, ‘Numerical Simulation of Turbulent Swirling Flow in 
Cylindrical Combustors, The Seventh Asian Congress of Fluid Mechanics, Dec 8-12, 1997, P 
689-692, Chennai (Madras), India.

National Conference Proceedings (Japan): 17

1. O.A. Khondker, X. Yang, N. Usui, A. Nakai and H. Hamada, Mechanical Performances of PP 
Plain Knitted Fabric Inserted PP Composite Using Injection Compression Moulding, JSPP, Tokyo, 
June 3-4, 2004.
2. O.A. Khondker, X. Yang, N. Usui, A. Nakai and H. Hamada, Impact and Plate-Bending 
Performances of PP Plain Knitted Fabric Inserted Homo PP Composite Using Injection 
Compression Moulding, SJFM, Osaka, 27-28 May, 2004.
3. O.A. Khondker, M. Inoda, K. Sugimoto, A. Nakai and H. Hamada, Energy Absorption Behaviour 
of Textile Hybrid Composites, Japan Society of Composite Materials (JSCM), Tokyo, P 81-82, 
24-25 May, 2004.
4. O.A. Khondker, Impact Behaviour of Weft-Knitted Glass/Vinyl ester Composites and Its 
Relationship to the Knit-Structural Parameters, Japan Society of Composite Materials (JSCM), 
Tokyo, P 17-18, 24-25 May, 2004.
Page 14 of 18 A Detailed CV of Dr. Omar A. Khondker
5. O.A. Khondker, X. Yang, A. Nakai and H. Hamada, Tensile Behaviour of Film-Stacked PP/PP 
Knitted Textile Composite Using 1×1 Rib Knitted Fabrics, Japan Society of Composite Materials 
(JSCM), Tokyo, P 97-98, 24-25 May, 2004.
6. O.A. Khondker, X. Yang, N. Usui, A. Nakai and H. Hamada, Impact Performances of PP Knit 
Inserted PP Injection Press Molded Composites, Japan Society of Composite Materials (JSCM), 
Tokyo, P 95-96, 24-25 May, 2004.
7. O.A. Khondker, U.S. Ishiaku and H. Hamada, Fabrication and Impact Performance of Jute/Vinyl 
ester Composites Using Natural and Bleached Woven Jute Fabrics, Japan Society of Composite 
Materials (JSCM), Tokyo, P 15-16, 24-25 May, 2004.
8. Nakai, T. Narita, O.A. Khondker and H. Hamada, Fabrication and Mechanical Properties of 
Fibre Reinforced Thermoplastic Composites, JSAE (Japan Society of Automobile Engineers) 
Spring Congress, Tokyo, 19-21 May 2004.
9. U. S. Ishiaku, S. Baba, O.A. Khondker, A. Nakai and H. Hamada, Processing and 
Characterization of Unidirectional and Short Fibre Composites of Jute Fibre Biocomposites, SMSJapan, Kyoto, February 10, 2004.
10. U. S. Ishiaku, S. Baba, O.A. Khondker, A. Nakai and H. Hamada, Weld-Line Strength and 
Properties of Injection Molded Jute /Poly Butylene Succinate Composites, Japan Society of 
Polymer Processing (JSPP), Yonazawa, Japan, November 3-4, 2003. 
11. K. Eto, K. Sugimoto, O.A. Khondker, A. Nakai, Impact Property of Matrix Hybrid Composites, 
48th FRP CON-EX, Tokyo, Japan, October 28-29, 2003. 
12. U. S. Ishiaku, M. Kitagawa, O.A. Khondker, A. Nakai and H. Hamada, The Effect of Processing 
Parameters on the Properties of Unidirectional Jute/PLA Composite, Japan Society of Polymer 
Processing (JSPP), Tokyo, Japan, June 12-13, 2003. 
13. U. S. Ishiaku, S. Takashima, O.A. Khondker, A. Nakai and H. Hamada, Processing and 
Characterization of Short-Fibre-Reinforced Jute/Poly Butylene Succinate Biodegradable 
Composites, The Textile Machinery Society of Japan (TMSJ), Osaka, Japan, June 5-6, 2003. 
14. U. S. Ishiaku, M. Kitagawa, O.A. Khondker, A. Nakai and H. Hamada, Processing and Properties 
of Long-Fibre Reinforced Jute Fibre/Poly (Lactic Acid) Biodegradable Composites Using MicroBraided Jute Yarn, Symposium of Interfacial Materials Science on Composites (SIMS-X), Osaka, 
Japan, April 23-25, 2003. 
15. O.A. Khondker, Effects of Deforming Knitted Glass Preform on the In-Plane Mechanical 
Properties of the Composite, The Textile Machinery Society of Japan (TMSJ), Osaka, Japan, 
June 5-6, 2003. 
16. O.A. Khondker, The Effect of Knit-Structure on the In-Plane Mechanical Properties of WeftKnitted Glass/Vinylester Composites, Symposium of Interfacial Materials Science on Composites 
(SIMS-X), Osaka, Japan, April 23-25, 2003.
17. O.A. Khondker, K. Sugimoto, U. S. Ishiaku, A. Nakai and H. Hamada, Bleaching Effects on the 
Tensile Properties of Woven Jute Fabric Reinforced Vinylester Composites, Symposium of 
Interfacial Materials Science on Composites (SIMS-X), Osaka, Japan, April 23-25, 2003.